Connecting the SAT system #

1. Clear line of sight for the antenna #

Make sure that the antenna has a clear view of the sky. Very close houses, trees or other high obstacles can interfere with the reception or make it impossible.

2. Connect the antenna to the case #

On the side of the SAT case there is a bar with connectors.
Connect the SAT antenna with the gray cable to the red marked socket.

3. Connect the power cable to the case #

Now connect the power cable to the gray marked socket.

4. Wait ten minutes #

The SAT dish now sets up and adjusts itself. Wait approx. 10 minutes until synchronization with the satellite is complete.

5. Connect network devices #

Now connect the network devices or WiFi access points. Connect the LAN cable to one of the blue ports.

Note: The LAN ports support PoE+ (power supply via the LAN cable for suitable devices).

Fold in the satellite dish #

1.WiFi to theWiFi #

WiFi-Name: Starlink Eventnet Config
WiFi-Password: starman24

2. Go to the configuration page #

To do this, enter in your Internet browser:
192.168.100.1

3. Go to the Configuration page #

Click on "SETTINGS" and then on the "CONFIRM" button.

Need help? #

Contact our support at 030 - 57 71 30 14