Connect SAT system
1. clear view for the antenna
Make sure that the antenna has a clear view of the sky. Very close houses, trees or other high obstacles can interfere with the reception or make it impossible.
2. connect the antenna to the case
On the side of the SAT case there is a bar with connectors.
Connect the SAT antenna with the gray cable to the red marked socket.
Connect the power cable to the case.
Now connect the power cable to the gray marked socket.
4. wait ten minutes
The SAT dish now sets up and adjusts itself. Wait approx. 10 minutes until synchronization with the satellite is complete.
5. connect network devices
Now connect the network devices or WiFi access points. Connect the LAN cable to one of the blue ports.
Note: The LAN ports support PoE+ (power supply via the LAN cable for suitable devices).
Fold SAT antenna
1. connect with the configuration-WiFi
WiFi-Name: Starlink Eventnet Config
WiFi-Password: starman24
2. call configuration page
To do this, enter in your Internet browser:
192.168.100.1
3. call configuration page
Click on "SETTINGS" and then on the "CONFIRM" button.
Do you need help?
Contact our support at 030 - 57 71 30 14